b170/b - b1100/b document number: ds30018 rev. 11 - 2 1 of 4 www.diodes.com january 2015 ? diodes incorporated b170/b - b1100/b 1.0a high voltage schottky barrier rectifier features ? guard ring die constructi on for transient protection ? ideally suited for automated assembly ? low power loss, high efficiency ? surge overload rating to 30a peak ? for use in low voltage, high frequency inverters, free wheeling, and polarity protection application ? high temperature soldering: +260c/10 second at terminal ? lead free finish/rohs compliant (note 1) ? green molding compound (no halogen and antimony) (note 2) mechanical data ? case: sma / smb ? case material: molded plastic. ul flammability classification rating 94v-0 ? moisture sensitivity: level 1 per j-std-020 ? terminals: lead free plating (matte tin finish). solderable per mil-std-202, method 208 ? polarity: cathode band or cathode notch ? weight: sma 0.064 grams (approximate) smb 0.093 grams (approximate) ordering information (note 3) part number compliance case packaging b1x-13-f aec-q101 sma 5,000/tape & reel b1xq-13-f automotive sma 5,000/tape & reel b1xb-13-f aec-q101 smb 3,000/tape & reel b1xbq-13-f automotive smb 3,000/tape & reel *x = device type, e.g. b180-13-f (sma package); b1100b-13-f (smb package). notes: 1. eu directive 2002/95/ec (rohs) & 2011/65/eu (rohs 2) compliant. all applicable rohs exemptions applied. 2. see http://www.diodes.com/quality/lead_free.html for more in formation about diodes incorporated?s definitions of halogen- an d antimony-free, "green" and lead-free. 3. for packaging details, go to our website at http://www.diodes.com. marking information top view bottom view ? green xxx = product type marking code, ex: b170 (sma package) xxxx = product type marking code, ex: b190b (smb package) = manufacturers? code marking yww = date code marking y = last digit of year (ex: 5 for 2015) ww = week code 01 to 52 yww xxx(x) sma / smb sma / smb
b170/b - b1100/b document number: ds30018 rev. 11 - 2 2 of 4 www.diodes.com january 2015 ? diodes incorporated b170/b - b1100/b maximum ratings (@t a = +25c unless otherwise specified.) single phase, half wave, 60hz, re sistive or inductive load. for capacitance load, derate current by 20%. characteristic symbol b170/b b180/b b190/b b1100/b unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v r 70 80 90 100 v rms reverse voltage v r ( rms ) 49 56 63 70 v average rectified output current @ t t = +125c i o 1.0 a non-repetitive peak forward surge current 8.3ms single half sine-wave superimposed on rated load i fsm 30 a repetitive peak reverse current i rrm 1.0 a thermal characteristics characteristic symbol b170/b b180/b b190/b b1100/b unit typical thermal resistance junction to terminal (note 4) r c/w operating and storage temperature range t j, t stg -65 to +150 c electrical characteristics @t a = 25c unless otherwise specified characteristic symbol min typ max unit test condition forward voltage drop v f - - 0.79 0.69 v i f = 1.0a, t a = +25c i f = 1.0a, t a = +100c leakage current (note 5) i r - - - - 0.5 5.0 ma @ rated v r , t a = +25 c @ rated v r , t a = +100c total capacitance c t - - 80 pf v r = 4v, f = 1mhz notes: 4. valid provided that terminals are kept at ambient temperature. 5. short duration pulse test used to minimize self-heating effect. 0.01 0.1 1.0 10 0 0.2 0.4 0.6 0.8 1.0 i , ins t an t ane o u s f o r wa r d c u r r en t (a) f v , instantaneous forward voltage (v) fig. 1 typical forward characteristics f t = 25c i pulse width = 300s j f 10 100 1,000 0.1 1 10 100 c , t o t al c a p a c i t an c e (p f ) t v , dc reverse voltage (v) fig. 2 total capacitance vs. reverse voltage r
b170/b - b1100/b document number: ds30018 rev. 11 - 2 3 of 4 www.diodes.com january 2015 ? diodes incorporated b170/b - b1100/b 0 0.5 1.0 25 50 75 100 125 150 i ave r a g e f o r wa r d c u r r en t (a) f(av), t , terminal temperature ( c) fig. 3 forward current derating curve t 10 20 30 40 0 110100 i, p eak f o r wa r d s u r g e c u r r e n t (a) fsm number of cycles at 60 hz fig. 4 max non-repetitive peak forward surge current single half sine-wave t = 150 c j package outline dimensions please see ap02002 at http://www.diodes.com/dat asheets/ap02002.pdf for the latest version. suggested pad layout please see ap02001 at http://www.diodes.com/dat asheets/ap02001.pdf for the latest version. smb dim min max a 3.30 3.94 b 4.06 4.57 c 1.96 2.21 d 0.15 0.31 e 5.00 5.59 g 0.05 0.20 h 0.76 1.52 j 2.00 2.50 all dimensions in mm sma dim min max a 2.29 2.92 b 4.00 4.60 c 1.27 1.63 d 0.15 0.31 e 4.80 5.59 g 0.05 0.20 h 0.76 1.52 j 1.96 2.40 all dimensions in mm dimensions value (in mm) c 4.00 g 1.50 x 2.50 x1 6.50 y 1.70 dimensions value (in mm) c 4.30 g 1.80 x 2.50 x1 6.80 y 2.30 a c j g b e h d c x 1 y g x sma smb
b170/b - b1100/b document number: ds30018 rev. 11 - 2 4 of 4 www.diodes.com january 2015 ? diodes incorporated b170/b - b1100/b important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. diodes incorporated does not assume any liability ari sing out of the application or use of this document or an y product described herein; neither does di odes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or us er of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability w hatsoever in respect of any products purchased through unauthoriz ed sales channel. should customers purchase or use diodes inco rporated products for any unintended or una uthorized application, customers shall i ndemnify and hold diodes incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death a ssociated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or more united states, international or foreign trademarks. this document is written in english but may be translated into multiple languages for reference. only the english version of t his document is the final and determinative format released by diodes incorporated. life support diodes incorporated products are specifically not authorized for use as critical component s in life support devices or systems without the express written approval of the chief executive offi cer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling c an be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support devic e or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-rel ated requirements concerning the ir products and any use of diodes incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporate d and its representatives against any damages arisi ng out of the use of diodes incorporated pr oducts in such safety-critical, life suppor t devices or systems. copyright ? 2015, diodes incorporated www.diodes.com
|
